Cable Ladder Systems

Cable Ladder Sytems is used for abot 75 percent of the cable support wiring system installations. It is predominate type due to its desirable features:
A Cable Ladder without covers permits the maximum free flow of air accross the cables. This allows the heat produced in the cable's conductors to effectively dissipate. Under such condition, the conductor insulation in the cables of a properly designed cable tray wiring will not exceed its maximum operating temperature.
So that cables will not prematurely age due to such circumtances. The rungs of the cable ladder provide covinient anchors for tying down the cables in the non-horizontal cable ladder runs or where the positions of the cables must be maintained in the horizontal cable installations. Cable may exit or enter through the top or the bottom of the Cable Ladder. Moisture can not accumulate in the ladder cable trays.

Under Floor Ducting Systems

The Under Floor Ducting Systems is designed to enclose power, telephone and uncillory system service cables, facilitation distribution in commercial and other similar establishments. Current commercial environments require multiple electrical circuit for secretarial, accounting and complex communications facilities. Open plan office layouts and modern building methods need a versatile arrangement of services for easy installation and flexibility in use.
The system is intended for laying on the structural slab prior to the screed being poured. Screeding levels of between 53 mm and 90 mm can be accomodated and a minimum screed cover of 25 mm is recommeded over the ducting.

Factory :
kawasan Industri Terboyo Semarang
Jl. Terboyo Industi Barat Dalam II M-111, Semarang 50118 - Indonesia
Ph. ( 62 - 24 ) 659 055-6 Fax. ( 62 - 24 ) 659 0565